Description

If you are looking for an integrated amplifier solution in your music system but you don’t want to sacrifice the benefits that true, well controlled power can bring then this amplifier is for you.

The rear panel layout includes four line level inputs and a user adjustable phono input. High quality WBT RCA connectors are used on all line level and phono inputs with additional balanced XLR inputs for CD and Line 1. It has RCA and XLR HT bypass input, remote IR input and 12V input/output triggers. There are four pairs of output connectors allowing bi-wired speaker applications, line level output for archiving and pre-out for bi-amping. The phono stage is optional.

On the front panel a small, unobtrusive 3.5mm jack allows a casual user to connect portable media, and the Hiato’s full function remote control also operates the Plinius CD players.

POWER

300 watts RMS per channel into 8 ohms
450 watts RMS per channel into 4 ohms
Both channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortion
FREQUENCY RESPONSE

20Hz to 20kHz ±0.2dB
-3dB at 70kHz
DISTORTION

Typically <0.05% THD at rated power
0.1% THD and IM worst case prior to clipping
CURRENT OUTPUT

50A short duration peak per channel
Fuse protected
SLEW RATE

Typically 5µs
HUM & NOISE

90dB below rated ouput 20Hz to 20kHz unweighted
POWER/CURRENT CONSUMPTION

800W
0.6A (138W) Class AB Idle
0.3A (69W) Standby
OPTIONAL PHONO INPUT

RCA Unbalanced
INPUT CAPACITANCE

100pF
ADJUSTABLE GAIN

50dB, 56dB, 60dB, 66dB
ADJUSTABLE LOAD

47k ohms, 470 ohms, 100 ohms, 47 ohms, 22 ohms
DIMENSIONS

Height: 170mm (7 1/2")
Width: 450mm (17 3/4")
Depth: 455mm (17 3/4")
Weight: 25kg (56lb)