Description

A special ABS (Acrylonitrile/Butadiene/Styrene) thermoplastic material is used for manufacturing of the body. This light-weight, impact resistant material is very suitable for injection-moulding and provides a very durable scratch resistant surface.
Neodymium magnets are implemented to achieve an optimal output.
Low internal impedance makes the cartridge less sensitive to load and therefore ensures compatibility with the widest range of preamps and transformers.

Specifications

Output voltage at 1000 Hz, 5cm/sec. | 0.3 mV
Channel balance at 1 kHz | 1.2 dB
Channel separation at 1 kHz | 23 dB
Channel separation at 15 kHz | 15 dB
Frequency range at – 3dB | 20-25,000 Hz
Frequency response 20-20,000 Hz | +/-1.5 dB
Tracking ability at 315Hz at recommended tracking force | 80 µm
Compliance, dynamic, lateral | 15 µm/mN
Stylus type | Nude Fine Line
Stylus tip radius | r/R 8/40 µm
Tracking force range | 2.1-2.5 g (21-25 mN)
Tracking force (recommended) | 2.3 g (23 mN)
Tracking angle | 20°
Internal impedance, DC resistance | 5 Ohm
Recommended load impedance | 20 Ohm
Cartridge body material | ABS/Aluminium
Coil wire material | Pure 4-nines copper
Cartridge colour | Bronze
Cartridge weight | 9 gram