Platinum In-Wall 3G can be installed either vertically or horizontally, which means it can be used on any channel within a system and is ideal for LCR applications and for seamless tonal accuracy within a theatre system.

System Format
3-Way

Frequency Response, Free-Field (-6dB)​
41 Hz – >60 kHz​

Frequency Response, In-Room (-6dB)
27 Hz – >60 kHz​

Sensitivity (2.83 Vrms @ 1m, Free-Field)​​
88 dB

Nominal Impedance
4 Ohms

Minimum Impedance
4.1 Ohms​ @ 1.6 kHz​

Continuous Power Handling​ ​(RMS into 4 Ohms, Pink Noise with 6dB Crest Factor)
300 W​

Recommended Amplifier Power​ (RMS into 4 Ohm, Music Signal)
150 – 600 W​

Bass Alignment
Sealed

Port Tuning Frequency
N/A

Crossover Frequency
LF/MF: 825 Hz​
MF/HF: 3 kHz​

Drive Unit Complement
2 x 6” RDT III bass driver,
1 x 4” RDT III mid-range driver,
1 x MPD III tweeter​​

External Dimensions (Including Grille and Terminals (H x W x D))
1207 x 332 x 105.5 mm (479/16 x 131/16 x 44/16”)

Cut-Out Dimensions
1175 x 300 x 97.5 mm (461/4 x 1113/16 x 313/16“)

Weight (each)
27.7 kg (61 lb)

Internal Volume
24 L

Dimensions (Including Grille and Bracket (H x W x D))
191.2 x 628.6 x 350 mm (71/2 x 243/4 x 133/4)

Weight
5.3 kg (11.7 lbs)

The Monitor Audio PLIC II in-ceiling speaker features an 8″ long-throw bass driver with Rigid Diaphragm Technology (RDT II) cone technology to provide immensely powerful bass lines. This is achieved by the RDT cone reacting to an audio signal with lightning-fast precision without deformation. To provide the listener with a uniform frequency spectrum when the speaker is played at higher frequencies, additional dual mid-range drivers that feature C-CAM cone technology and Monitor Audio’s Micro Pleated Diaphragm (MPD) transducer are mounted on a rigid aluminium baffle and directed towards the listening zone to provide uniform mid- and high-frequency dispersion.

All PLIC II drivers employ a heavy-duty motor system, which deploys an under-hung motor assembly to ensure the coil always remains in the gap, even when driven hard. The addition of copper ‘shorting’ rings greatly improves magnetic linearity and lowers intermodulation distortion, resulting in crisp and clear audio delivery. A world first for an in-ceiling speaker!

Designed for installation in both new build and retrofit projects, the PLIC II in-ceiling speaker features Monitor Audio’s unique Tri-Grip fixing system. This 3-position ‘dog-leg’ style fixing provides a greater contact surface area than other types. This system, combined with the magnetic grille, saves the installer both time and money by speeding up the speaker fitting process.

To ensure controlled audio performance, Monitor Audio has designed an MDF back box with a predetermined air volume of 24 L. The rigid box is available with pre-loaded internal damping material to provide the best possible sound absorption and reduce standing waves.

To satisfy the interior designer and end-user, the circular grille can appear almost invisible by being painted to match the room décor. Monitor Audio also offers a square option to match lighting fixtures and ventilation.

An optional square grille can be used with this model.

System Format
3 Way – 4 Driver

Frequency Response (-6 dB)
45 Hz – 60 kHz

Sensitivity (1W@1M)
90 dB

Maximum SPL
112 dBA

Nominal Impedance
4 ohms (3.1 ohms minimum @ 1.1 KHz)

Power Handling (RMS)
150 W

Recommended Amplifier Requirements
50 – 150 W

Recommended Enclosure
PLIC-BOX II or a bespoke sealed enclosure of 24 litres

Mid / H.F Crossover Frequency
5.3 KHz 3rd order (18 dB / Octave)

Bass / Midrange Crossover Frequency (Hz)
380 Hz 4th Order (24 dB / Octave)

Drive Unit Complement
1 x 8″ long-throw RDT II bass driver
2 x 2″ C-CAM mid-range drivers
1 x MPD high-frequency transducer

Adjustment Controls
HF level switch (+1 dB / 0 dB / -1 dB)
MF level switch (+1 dB / 0 dB / -1 dB)

Connection
High-end ‘Push’ type terminals

Fixing Type
3 position Tri-Grip dog fixings

Overall Diameter – Grille On/Off
309 mm (123/16″)
296.25 mm (1111/16″)

Overall Depth – Grille On/Off
191.5 mm (71/2″)
188 mm (73/8″)

Construction Material
Main chassis – Mineral Filled ABS (RoHS2 compliant)
Baffle – Die cast Aluminium

Grille Type
Low profile trimless grille with magnetic fixings – Paintable (square grille available as a cost option)

Optional Square Grille – Outer Dimensions
309 x 309 mm (123/16″)

Cut-Out Hole Diameter
273 mm (103/4″)

Mounting Depth
185 mm (75/16″)

Weight (each)
5.22 kg (11 lb 8 oz)

Pre-Construction Bracket
CB10 Pre-Construction Bracket (Light Brown)

Back Box
PLIC-BOX II

Sold As
Single Unit

THX Certification
THX® Certified Ultra (with 2 x Cinergy Sub15’s)

System Format
N/A

Sensitivity (2.83 Vrms @ 1 M)
86 dB @ 100 Hz

Maximum Linear SPL**** (@1m, free space)
Continuous 109 dB, Peak 120 dB

Power Handling (RMS)
Continuous 600 W, Peak* 1500 W (Band limited***)

Nominal Impedance
4 Ohms

Minimum Impedance (20 Hz – 20 kHz)
4 Ohms

Recommended Low Frequency Crossover Frequency
40 – 100 Hz (Low Pass)

Recommended Amp Requirements (RMS)
Must be used with IA750-2 / IA750-4 running C Sub Profile

Bass Alignment
Sealed

Port Tuning Frequency
N/A

LF Extension, In Wall, With Port Bungs (- 6dB)
N/A

LF Extension, In Free Space, No Port Bungs (- 6dB)
17 Hz (IA750-2 / IA750-4)

HF Extension (-6dB)
N/A

Drive Unit Complement
1x 15″ Ultra high Excursion C-CAM Driver

External Dimensions (Cabinet Only (H x W x D))
540 x 540 x 280 mm (211/4 x 211/4 x 11″)

External Dimensions (Inc Grille) (H x W x D)
N/A

Max External Dimensions (Inc all Fittings) (H x W x D)
567 x 540 x 280 mm (225/16 x 211/4 x 11″)

Weight
38.5 kg (84 lb 12 oz)

Conditions
* Calculated from a peak voltage, this is not a true power figure but useful for comparisons.

** When used in an In-Wall or On-Wall configuration it is recommended to use the fitted port bungs to control bass output. This will effectively make the product a sealed box.

*** Band limited with Low pass at 200 Hz, should only be used with IA800-2C and the correct speaker profile.

**** Tested with a music like noise signal with distortion and power compression remaining below audible limits.

THX
THX® Certified Loudspeakers.

THX® and the THX® Logo are the property of THX® Ltd., registered in the U.S. and o

True cinema sound at home
Whether it’s mounted with the unique isolation options included or even used as a floorstander, with professional installation as part of a Cinergy system, you’ll have world-class cinema sound in your own home. Far superior to your local mainstream cinema, which is normally designed for larger groups to deliver the best median performance for everybody. Cinergy, on the other hand, is a cinema built around you and those closest to you.

THX Certification
THX® Certified Ultra

System Format
3 Way

Sensitivity (2.83 Vrms @ 1 M)
90 dB

Maximum Linear SPL**** (@1m, free space)
Continuous 109 dB, Peak 122 dB

Power Handling (RMS)
Continuous 350 W, Peak* 1400 W

Nominal Impedance
4 Ohms

Minimum Impedance (20 Hz – 20 kHz)
3.8 Ohms

Recommended Low Frequency Crossover Frequency
40 – 80 Hz (High Pass)

Recommended Amp Requirements (RMS)
200 – 1400 W (IA750-2 or IA750-4)

Bass Alignment
Ported**

Port Tuning Frequency
38 Hz**

LF Extension, In Wall, With Port Bungs (- 6dB)
42 Hz

LF Extension, In Free Space, No Port Bungs (- 6dB)
42 Hz

HF Extension (-6dB)
>30 kHz

Drive Unit Complement
2 x 8″ RDT Driver
2 x 2.5″ C-CAM Driver
1 x MPD Transducer

External Dimensions (Cabinet Only (H x W x D))
1080 x 300 x 240 mm (421/2 x 1113/16 x 97/16″)

External Dimensions (Inc Grille) (H x W x D)
1080 x 300 x 253.6 mm (421/2 x 1113/16 x 10″)

Max External Dimensions (Inc all Fittings) (H x W x D)
1132 x 438 x 253.6 mm (449/16 x 171/4 x 10″)

Weight
40.4 kg (88 lb 14 oz)

Conditions
* Calculated from a peak voltage, this is not a true power figure but useful for comparisons.

** When used in an In-Wall or On-Wall configuration it is recommended to use the fitted port bungs to control bass output. This will effectively make the product a sealed box.

*** Band limited with Low pass at 200 Hz, should only be used with IA800-2C and the correct speaker profile.

**** Tested with a music like noise signal with distortion and power compression remaining below audible limits.

THX
THX® Certified Loudspeakers.

THX® and the THX® Logo are the property of THX® Ltd., registered in the U.S. and other countries.

THX Certification
THX® Certified Ultra

System Format
3 Way

Sensitivity (2.83 Vrms @ 1 M)
90 dB

Maximum Linear SPL**** (@1m, free space)
Continuous 109 dB, Peak 122 dB

Power Handling (RMS)
Continuous 350 W, Peak* 1400 W

Nominal Impedance
4 Ohms

Minimum Impedance (20 Hz – 20 kHz)
3.8 Ohms

Recommended Low Frequency Crossover Frequency
80 – 100 Hz (High Pass)

Recommended Amp Requirements (RMS)
200 – 1400 W (IA750-2 or IA750-4)

Bass Alignment
Ported**

Port Tuning Frequency
47 Hz**

LF Extension, In Wall, With Port Bungs (- 6dB)
47 Hz

LF Extension, In Free Space, No Port Bungs (- 6dB)
47 Hz

HF Extension (-6dB)
>30 kHz

Drive Unit Complement
2 x 8″ RDT Driver
2 x 2.5″ C-CAM Driver
1 x MPD Transducer

External Dimensions (Cabinet Only (H x W x D))
904 x 300 x 160 mm (359/16 x 1113/16 x 65/16″)

External Dimensions (Inc Grille) (H x W x D)
904 x 300 x 173.6 mm (359/16 x 1113/16 x 613/16″)

Max External Dimensions (Inc all Fittings) (H x W x D)
904 x 300 x 173.6 mm (359/16 x 1113/16 x 613/16″)

Weight
30 kg (66 lb)

Conditions
* Calculated from a peak voltage, this is not a true power figure but useful for comparisons.

** When used in an In-Wall or On-Wall configuration it is recommended to use the fitted port bungs to control bass output. This will effectively make the product a sealed box.

*** Band limited with Low pass at 200 Hz, should only be used with IA800-2C and the correct speaker profile.

**** Tested with a music like noise signal with distortion and power compression remaining below audible limits.

THX
THX® Certified Loudspeakers.

THX® and the THX® Logo are the property of THX® Ltd., registered in the U.S.

THX Certification
THX® Certified Ultra

System Format
3 Way

Sensitivity (2.83 Vrms @ 1 M)
89 dB

Maximum Linear SPL**** (@1m, free space)
Continuous 103 dB, Peak 116 dB

Power Handling (RMS)
Continuous 200 W, Peak* 800 W

Nominal Impedance
4 Ohms

Minimum Impedance (20 Hz – 20 kHz)
3.8 Ohms

Recommended Low Frequency Crossover Frequency
80 – 100 Hz (High Pass)

Recommended Amp Requirements (RMS)
100 – 800 W (IA750-2 or IA750-4)

Bass Alignment
Ported**

Port Tuning Frequency
67 Hz**

LF Extension, In Wall, With Port Bungs (- 6dB)
48 Hz

LF Extension, In Free Space, No Port Bungs (- 6dB)
65 Hz

HF Extension (-6dB)
>30 kHz

Drive Unit Complement
1 x 8″ RDT Driver
1 x 2.5″ C-CAM Driver
1 x MPD Transducer

External Dimensions (Cabinet Only (H x W x D))
460 x 350 x 160 mm (181/8 x 133/4 x 65/16″)

External Dimensions (Inc Grille) (H x W x D)
460 x 350 x 174.1 mm (181/8 x 133/4 x 67/8″)

Weight
18.4 kg (40 lb 8 oz)

Conditions
* Calculated from a peak voltage, this is not a true power figure but useful for comparisons.

** When used in an In-Wall or On-Wall configuration it is recommended to use the fitted port bungs to control bass output. This will effectively make the product a sealed box.

*** Band limited with Low pass at 200 Hz, should only be used with IA800-2C and the correct speaker profile.

**** Tested with a music like noise signal with distortion and power compression remaining below audible limits.

THX
THX® Certified Loudspeakers.

THX® and the THX® Logo are the property of THX® Ltd., registered in the U.S. and other countries.

High-fidelity Monitor Audio performance, outside or in.
Voiced and engineered by the Monitor Audio acoustic team in the same manner as any premium loudspeaker, Climate CL2 M delivers sonic detail and dynamic bass performance with ease.

With advanced driver technology and powerful motor systems, along with an Auxiliary Bass Radiator (ABR) to extend the bass output—which is also ideal for external placement—and featuring the innovative ‘Quik-Link’ bracket system, Climate Small’s contemporary design blends in as seamlessly with interiors as it does with exteriors.

Rating
IP66

System Format
2-Way

Sensitivity (2.83v @ 1m, Installed)
85.5 dB

Recommended Amplifier Power​(RMS, Music Signal)
200 W

Continuous Power Handling (CTA 426-B)
100 W

Nominal Impedance
6 Ohms

Minimum Impedance (20Hz to 20kHz)
4.8 Ohms

Drive Unit Complement
1 x 6″ C-CAM RST II bass-mid driver
1 x 25 mm C-CAM black dome tweeter

Frequency Response, On-Wall (-6dB)
42Hz – 30kHz

Maximum Peak SPL (AES75, Z-weighted)
110 dB

Bass Alignment
Auxiliary Bass Radiator

Crossover Frequency
2.6 kHz

External Dimensions with all accessories fitted(H x W x D)
332 x 190 x 240 mm (131/16 x 71/2 x 97/16″)

Weight (each)
4.1 kg (9 lb 1 oz)

Warranty
5 years

Rating
IP66

System Format
2-Way

Sensitivity (2.83v @ 1m, Installed)
84 dB

Recommended Amplifier Power​(RMS, Music Signal)
150 W

Continuous Power Handling (CTA 426-B)
70 W

Nominal Impedance
6 Ohms

Minimum Impedance (20Hz to 20kHz)
4.9 Ohms

Drive Unit Complement
1 x 4″ C-CAM RST II bass-mid driver
1 x 25 mm C-CAM black dome tweeter

Frequency Response, On-Wall (-6dB)
56Hz – 30kHz

Maximum Peak SPL (AES75, Z-weighted)
108 dB

Bass Alignment
Auxiliary Bass Radiator

Crossover Frequency
3.3 kHz

External Dimensions with all accessories fitted(H x W x D)
247 x 140 x 217 mm (93/4 x 51/2 x 89/16″)

Weight (each)
2.7 kg (5 lb 15 oz)

Warranty
5 years

Deep, Controlled Bass. Simply.
Engineered to deliver the deepest bass in the largest of spaces, the Anthra W15 subwoofer features a massively powerful 2,500 Watt Class-D amplifier driving a 15” (38cm) Rigid Surface Technology II (RST II) C-CAM high-excursion driver. The W15 can be used on its own or linked with up to three other Anthra subwoofers for a truly immersive, ultra-dynamic listening experience.

A full-colour LCD display and rotatory dial are located on the back panel to allow for basic subwoofer setup and EQ preset selection, while advanced features including DSP configuration and multi-sub connectivity setup are available via the MaestroUnite app.

System Format
Active – Sealed Cabinet

Drive Unit Complement
1x 15″ (381 mm) High Linear-Excusion Triple Suspension Driver

Amplifier Classification
High-Efficiency Class-D

Lower Frequency Limit
-6dB @16Hz

Upper Frequency Limit
(LPF Off) -6dB @400Hz

Driver Excursion (pk-pk)
50 mm

DSP
28 Bit 50 MIPS Configuratable through MaestroUnite

Analogue Digital Conversion
Autoranging Input which combines a 10Vrms maximum input with low signal to noise for small signals

Amplifier Output Power, 240Vac
Instantaneous: 2500 W*
Continuous short-term: 1400 W**

Amplifier Output Power, 120Vac
Instantaneous: 2500 W
Continuous short-term: 1400 W

LED UI Control
Brightness, On-Off

Phase Control
0-360 Degrees measured at LPF Crossover

Low Pass Filter
20-200Hz LPF with Roll off Adjustable from -3 to -48dB/Oct

Custom EQ
Configurable through MaestroUnite;3 pre-defined EQ curves plus 3 custom EQ curves each with 8 band custom EQ supporting (Peaking, High Shelf, Low Shelf, High Pass)

Volume Level
Wide adjustable input gain to allow maximum output from a wide range of input signals

Inputs
Stereo Unbalanced RCA (or mono/LFE using only connector marked LFE)
Mono/LFE Balanced XLR

Outputs
Stereo unbalanced outputs with unbuffered throughput from RCA Inputs
Mono/LFE Balaned XLR outputs with unbuffered throughput from XLR Input

Mains Input Voltage
Universal Mains, 85-265VAC

External Dimensions (without feet) (HxWxD)
439 x 439 x 439 mm

Power Consumption
550 W

Cabinet Construction
Braced 25 mm thick MDF with 36 mm front baffle

Grille
Cloth covered magnetically attached Grilles

Weight
35.41 kg (78 lb 1 oz)

* Maximum RMS output for an instantaneous signal
** Sinewave for 10 seconds
Warranty
5 years